Free Fibre Optic Installation


This is intended as an overview and installation checklist for all managers and engineers on the overall process of designing, installing and operating a fiber optic communications system. Fiber optics offers major advantages for communications systems including security, distance and bandwidth. 1.3 Introduction Quality Control and Testing Precise Production Control and Rigorous Testing Ensure a Trouble-Free Cable The superior performance of CommScope fiber optic cables derives as much from the manufacturing process as. Welcome back to The Ultimate Tech Hub. On today's episode we are switching from Cox Cable to CenturyLink Fiber Optics. We will show you the entire installati.

Most loose tube fiber optic cables are available with either gel-free or gel-filled tubes.
Although the end performance is essentially the same, there are some key differences in construction. This blog will help with your decision on which product is best suited for your intended application.

NEED CUSTOM FIBER CABLE? Use our Fiber Design Guide!

The Similarities

  • Both gel-free and gel filled fiber optic cable pass all current industry requirements
  • Both are designed with the flexibility to withstand the rigors of outdoor installation
  • Both gel-free and gel filled fiber optic cable are designed to perform in extreme environments

The Differences

The primary difference between gel-free and gel filled fiber optic cable is the method used to block water from migrating into the cable itself.

The low down on gel-free

This type of loose tube fiber optic construction means that between the fiber optics and outer jacket there is some form of water swellable material. This is usually tape but could also be foam or strings. These dry items are treated with an absorbent material to help keep water away from the optic fibers themselves.

Gel-free pros

  • Installers love dry loose tube construction because it is mess free with no gel to clean off prior to splicing or termination.
  • It can also indicate a cost savings, because no mess to clean up means less billable time for installers.

Gel-free cons

Although the materials used to fill the tube are treated with an absorbent substance, they do not fill the entire tube as gels do. This can allow some amount of water to enter the tube leaving the fiber somewhat vulnerable.

Fibre Optic Broadband My Area

All about gel filled


This type of loose tube fiber optic construction means that the space not occupied by fiber optics within the tube is a gel.

Gel-filled pros

  • A gel-filled loose tube means that the tube is filled with gel to block the water from migrating into the tube and around the fibers
  • Loose tube cable has gel-filled fiber that is free floating so there is less tension on the fibers themselves.
  • The gel adds an additional layer of protection for the fiber.

Gel-filled cons

The main disadvantage of gel-filled loose tube fiber optic cable is that you have to clean the gel from the fibers which slows down the installation process and can be a mess for installers.

What do the differences mean to me?

There is no one fiber optic cable that is perfect for every application. To determine which type of loose tube fiber is right for you means asking yourself a few key questions.

  • What is the likely level of water contact?
  • When do you need the product?

If you need the product now, our shorter lead times at Remee Wire & Cable gives us a competitive edge within the industry. Additionally, consider our ability to produce smaller runs over predominate large manufacturers. If you need a shorter run, we might be a great choice! To find out more about Remee or to get help determining if we have the product to suit your needs, reach out to one of our sales contacts, or fill out the Request Quote form.

The installation process starts when you place an order for fibre with your broadband provider. Every property is unique, so there may be a few extra steps involved in getting fibre to your place. But no matter where you live, we need to complete the following steps to get you connected. Once we have your order, we can discuss the installation process specific to your place in more detail.

Agree your install plan
When we receive the order from your broadband provider, we’ll get in touch to arrange for a Chorus technician to meet with you at your house to talk you through the work required and agree on your installation plan.

The initial meeting with a Chorus technician takes approximately an hour. Any work that needs to be completed both inside and out on your property will be noted on an agreement form completed by your Chorus technician which you’ll be asked to sign.

This agreement covers what we need to do to get the fibre from the road to the outside of the house and where we will install your fibre equipment inside the property. Our technician will also discuss the build and connect components of the install with you.

Fiber Optic Network Diagram Pdf

Build your fibre
Next we build fibre from the road to your house. You don’t need to be at home for this but it helps if you are contactable by phone, just in case we do need to make any changes to what was agreed. We build the fibre from the street to your property and connect it to a small box installed on the outside of your house called an external termination point (ETP).

Fiber Optic Tutorial Pdf

If your existing copper phone line is connected by aerial cable or an underground pipe, we usually install your fibre cable in the same way. Windows installer 4.5 xp sp2 free download. If that’s not possible we’ll recommend another option.

Free Fibre Optic Installation

Learn more about build methods here.

Fibre Optics In My Area

Connect you
Once we’ve built the fibre to the outside of your house, it’s on to getting you connected. You will need to be home for up to four hours for this visit as we bring the fibre from the outside of the house, inside.

Our technician will take the fibre from the ETP that we installed outside your house earlier, and connect it to another small box called an optical network terminal (ONT) inside your house. This is what your modem connects to.

The technician will complete the internal wiring and installation of the new fibre equipment in the agreed position as well as testing it before leaving.

Free Fibre Optic Installation Near Me

Download more information

Free Fibre Optic Installation Singapore

Download our agreement which our Chorus technician will ask you to sign

Related Posts

 cleardn.ajkernilphamari.co © 2021